About bwletterpress

image: bwletterpress's picture
Recent content
TitleUpdated
Stuck Throw-Off15 Mar 10
New Style C&P 10x15 Parts13 Dec 09
Bed Shaft & Short Throw-Off Shaft Specs - C&P New...13 Dec 09
Recent comments
Title ↓Date
You should definitely consult a...31 Jan
You say that you get 10 bad prints for...10 Feb
You mentioned that you moved the plate...18 Mar
When we were considering doing this for...10 Mar
When we are working with photopolymer...17 Oct
We've worked with Diego at EZ-Rigging...14 May
We use our 10x15 NS with only a treadle...7 Jul
We use both Inkscape (primarily) and...25 Apr
We loved working with them to move our...25 Jul
We just finished assembling a C&P New...9 Mar
We had been renting a first floor...23 Jun
We don't use a Vandercook, but when we...28 Apr
We also had a similar thing happen to...16 Aug
To clarify, my understanding is that he...9 Aug
This may not be as much of an issue...28 Jul
This may be stating the obvious, but...17 Feb
The registration marks that we use for...9 May
The pins are straight pins. I wouldn't...16 Mar
That is unfortunate news since taking...10 Feb
That is the machine pin that keeps the...15 Mar
Thanks. As stated before, when...18 Mar
Sadly I don't have any advice, but...4 Apr
Re: cautionary tale: What exactly sent...3 Jan
Prefaced with the fact that we are NOT...3 Nov
People using debossing and embossing...13 Feb
My knowledge of the variety of gauge...29 Sep
I'm not familiar with this press or the...24 Oct
I'm not familiar with Vandercooks, but...15 Jun
I'd definitely second everything that...27 Dec
I'd be wary of selling the press to the...17 Aug
It may be worth it to disconnect the...9 Feb
Is the shrinkage concern only during...11 Sep
Is part of the fundraising to pay for...18 Nov
Inkscape4 Jun
If you are just talking about restoring...1 Aug
If there was additional costs to using...11 Oct
I will verify the levelness of the...16 Mar
I think that the 3/32" margin was to...18 Jul
I haven't been able to try any of what...7 Apr
I am 6'4" (mostly legs) and we have a...27 Oct