About mikefrommontana

image: mikefrommontana's picture
  • Member for 5 years 37 weeks.
  • Last access 23 hours 49 minutes ago.
Recent content
TitleUpdated
Quality Letterpress Printing24 May 11
Recent comments
TitleDate ↓
Lettra and the ilk are annoying papers...14 May
Where? At ground level? Doorways...14 May
Conventional "chip board" is actually...13 May
Of course paper grain has a big effect...29 Apr
No Gerald, you didn't fail. The fact...13 Apr
dupe post12 Apr
The key to a the Vertical is also to...12 Apr
Just thought somebody ought to thank...11 Apr
Alternately, there's a set on Ebay...8 Apr
I would not recommend Lettra for...28 Mar
It may not be that the numbers aren't...28 Mar
You may get extremely lucky and find...26 Mar
If you are running polymer, I would do...25 Mar
Remember, whatever is going to scrap...23 Mar
Some automated...23 Mar
Most folks tend to think of linecaster...23 Mar
If you can find 6 point score rule...22 Mar
The unit wheel is the one to turn the...22 Mar
My 10 x 15 C &P OS came in on a skid...22 Mar
Actually, you can print a job work and...21 Mar
Actually Linotypesetting.com (a portion...17 Mar
They are for printing colored...11 Mar
The plunger is high as the closure of...11 Mar
Ericm is correct. Many of the old...9 Mar
Just remember that .003 is the...8 Mar
While digital certainly provides an...6 Mar
I believe the Little Giant is a No 4....4 Mar
Seriously neat to bring back presses...27 Feb
Alas, the Vertical does not favor...18 Feb
Note that the Katz coasters are...16 Feb
Presuming you are talking die-cutting...16 Feb
The Craftsman will run impressional...14 Feb
Except for the embossing, I give the...14 Feb
Peter is right, you should be running a...6 Feb
Guide? Gripper? I'll take a stab...5 Feb
Just a note that the original shafts...3 Feb
No, I didn't break out the make-ready...3 Feb
Also check to see that there is...3 Feb
Most of your overhead should get built...1 Feb
You extinguish the candle before...29 Jan