About helimited

image: helimited's picture
  • Haven Press
Recent content
TitleUpdated
Seeking Letterpress Partner22 Jul 18
Paging Inky29 Dec 11
Miehle Cylinders on Ebay19 Dec 11
"Perfect Register" Gauge Pins25 Feb 11
Adast Press: Any feedback? Anyone used it?9 Jan 11
Photopolymer Platemaking- An introduction21 Dec 10
Recent comments
TitleDate ↓
Absolutely stunning.3 Jun
Silicon impregnated sheet is cheap and...3 Jun
Silicon impregnated sheet is cheap and...3 Jun
If it is not the micro-switch- Check...31 May
The best way to land it is to tell them...10 Jan
The 40157485 table would certainly...10 Jan
Try 2 ply black museum...9 Jan
After speaking with Terry earlier...7 Jan
People use it because they're too lazy...7 Jan
I don't have any reason to doubt the...5 Jan
You could do it with high quality...5 Jan
How fast does the press run? A...4 Jan
Depends on the type of metal.3 Jan
It's true- Normally, the grippers on a...3 Jan
So my C&P could sqeeze through a 35.5"...2 Jan
So my C&P could sqeeze through a 35.5"...2 Jan
So my C&P could sqeeze through a 35.5"...2 Jan
So my C&P could sqeeze through a 35.5"...2 Jan
So my C&P could sqeeze through a 35.5"...2 Jan
So my C&P could sqeeze through a 35.5"...2 Jan
Starret makes a (relatively)...2 Jan
There is no "blade alignment" front to...2 Jan
Mac, A smaller size golding pearl...2 Jan
Vertical etch tanks are used...1 Jan
No, but nice french tool in the...31 Dec
Yeah, Paul is right, the crank has a...31 Dec
Looks and sounds just like the pin...31 Dec
As a good smaller-lot alternative- You...29 Dec
Good; cheap; easy. You can pick two and...24 Dec
Isn't the term used sometimes...23 Dec
Yeah, that person has nothing on...22 Dec
Looks like a Chandler and Price I once...22 Dec
I've had a lot of really great luck...19 Dec
Rick- I will come to my first Wayzgoose...19 Dec
I happen to really like these inks, but...19 Dec
Ebay, man. Ebay. Challenge is the brand...6 Oct
I suggest picking up material that is...6 Oct
MUNCHKIN STICK IS SOO CUTE3 Oct
We're not copying the megill design;...30 Sep
But folks, he's already got the...29 Sep