About equitas

Recent content

Title	Updated
*Artepelller - STOP POSTING!!!!	26 May 13
*Shop Size for Vandercook	14 May 13
Saddle for C&P OS 8x12	1 Jul 09
Heidleberg/Kluge -vs- Miehle/ATF	29 May 09
+ Vandercooks: which one to buy?	24 Apr 09
* Soda blasting a very dirty press	4 Apr 09
* Missing part on C&P 8x12 shaft	29 Mar 09
Letterpress Instruction - Toronto	6 Feb 09
Weight of press & wooden floor	19 Jan 09
Dimensions of C&P, Kluge, etc..	18 Jan 09

Recent comments

Title	Date ↓
Thanks BillWhitley & scottbaldwin....	6 Jan
Folks - an update...yes, 6.5 years...	2 Jan
AnonyMouse: Thanks! I like the idea...	6 Jun
HavenPress - I planon having the glass...	5 Jun
Here is, what I hope, is a reasonable...	5 Jun
I have one final option which might...	26 May
What if I took CarolinaPrinter's idea...	24 May
Parallel - Imp: I thought if I had...	24 May
Here is one of the options I have about...	24 May
Many thanks to all, especially John...	17 May
Uh, oh.....I got the measurements of...	15 May
Dick: How much space would you...	14 May
Just out of curiosity, where in the...	8 Feb
I got interested in printing in 2008, I...	6 Feb
I, too, am looking for lessons on a...	26 Jan
Here is a thread you might wish to...	13 Jan
Follow this thread:...	23 Feb
Check out the cross posting at:...	6 Oct
I completed her workshop earlier this...	6 Oct
What's a "Channel matrix"? sorry for...	21 Jul
I might have one, but it is in Canada....	7 Jul
Oh yes, of course, thanks!	3 Jul
In the last picture, there is a cogged...	3 Jul
I used the Sherwin-Williams Kem Kromic...	30 Jun
Thanks a lot Casey!	29 May
Very interesting - not the answers I...	29 May
Strange....it played quite quickly for...	27 May
Just an update to everyone, and a big...	26 May
I'm a budding pressman, and I've got a...	19 May
I've gotten the press cleaner. As you...	18 Apr
DTP: interesting story. I quite agree...	14 Apr
DTP - you have an absolutely GORGEOUS...	12 Apr
The wire brush didn't do so well. No...	11 Apr
An update: I've used oven cleaner and...	11 Apr
I think I'm going to go with the...	8 Apr
The other thought was that perhaps I...	4 Apr
Hmmmm. interesting. So how much did you...	4 Apr
Printers, I thank you! You have put my...	30 Mar
Arie: Thanks. Any idea where I could...	29 Mar
Paper Diva, Fuschia Rose, Snoovy, Soyee...	24 Mar