About skiyou

image: skiyou's picture
Recent content
TitleUpdated
Short Fountain, C&P with bracket11 Apr 18
Press parts & accessories C&P11 Apr 18
September Printers Fair want to Buy & Sell12 Aug 14
Miehle 40" available...Rescue !!! 14 Jul 14
C&P parts wanted, 8X12OS18 Jun 13
Mt.Pleasant June 29 Want to Buy/Sell...Printers...8 Jun 13
Miehle Rescue Alert!!!25 Jan 13
Ram Truck TV Ad31 May 11
Recent comments
TitleDate ↓
Hello Have brass rule to sell. Asking...1 Jul
It sounds like you have a v50 roller...1 Oct
What size do you need?12 Jul
Stale beer...the old timers anti-wotkup...10 Jul
Hello Feedboards look nice. How much...5 Jul
The key Will slide out as the wheel...27 Jun
The wheel and gear were pressed on by a...26 Jun
Pull the smaller wheel with a large 3...25 Jun
Did many #10's back in the day...we had...18 Jun
Some guy is parting out a 10x on...2 Oct
Hello I'm seeking several things for a...12 Sep
Hello I have plenty to sell Let me...22 Aug
Belting / power transmission shops can...16 Aug
Oil only on the press. I would check...17 Jul
Hello To install the roller... cycle...15 Jul
Hello 18 t 56 = Erbar Bd Cd with Erbar...11 Jul
One blessing is parts are easier to...8 Jul
Pic looks like a miehle V45 and a ATF...2 Jun
Looks like a 'shoot' delivery tray from...19 May
Frank, I have some used, serviceable...28 Mar
Frank, I have some used, serviceable...28 Mar
Hello This can be done, but its a big...24 Mar
Hello If the pulley is hopelessly...20 Mar
Hello bales can be crushed and...9 Mar
Hello The table is one piece. Done...20 Feb
Hello I think it is unlikely you will...2 Dec
On Old C&P bench cutters The back gauge...27 Nov
Check with Scott Moore Moore Wood Type27 Nov
Hello, I'v done this many times, years...19 Nov
Fits. No modification needed.13 Jul
Check with Dave Churchman...16 Jun
Hello In many applications a roll pin...29 May
Nice looking shop.29 May
Thanks for your vigilance and heads...14 May
Some times a shim is needed under the...11 May
Had an Acme snap-on for my 10x back in...8 May
This seems very odd to me. Something...24 Apr
I would check with Scott Moore at More...22 Apr
Formulas for pulleys, pulley diameter...19 Apr
Hello I have several bench top cutters...15 Apr