About chuck the printer

image: chuck the printer's picture
  • Member for 14 years 1 week.
  • Last access 9 years 28 weeks ago.
Recent content
TitleUpdated
Common Language24 Aug 11
Bakelite Furniture22 Aug 11
Ivory Faced Wood Type16 Aug 11
Bristol3 Aug 11
Claxton Chases17 May 11
press color28 Apr 10
Recent comments
Title ↓Date
You might try bronzing if foiling is to...9 Oct
you might go to a hardware store and...23 Oct
you could, but it would be better to...18 Nov
You could have got the results you...24 Jul
You can purchase 1 1/8 wrenches at...29 Aug
You can buy acme threaded rods online...16 Jul
with my back against the wall I have...26 Dec
Well the scamp at it best could make a...28 Aug
Use to run "Goes" bronzed certificate...20 Jul
Uncoated stocks do not do well with...25 Oct
Try wetting the stuck parts with WD-40...3 May
Try force drying several printed pieces...28 Oct
This is the reddish brown, just wonder...22 Aug
the ideal part would be the one that...12 Nov
The answer to all three is still NO...23 Oct
That applies to printing from plates....24 Jul
thanks so much for your response....29 Apr
Thanks for the information, I'm sure it...17 Aug
Sounds like a dull blade and not enough...9 Oct
Some Champions of that era were...17 Apr
Several years ago Don Leach was still...30 May
recently purchase a caxton 4X6 with 6...27 Apr
posted twice.21 Nov
Over the past year I have read various...17 Apr
Other than painting it a darker green...14 Aug
On each side of the frame there should...6 Apr
Oil base is the way to go, use dryers...19 Mar
Not an easy press to learn on. Can do...22 Apr
No, the spring doesn't adjust. The...9 Jan
No leg pulling, it works on white or...7 Sep
Most likely it is the threaded cast...31 Oct
Most likely it is the threaded cast...31 Oct
most anyone that sharpens blades has...16 Dec
Mixing oil and rubber based inks works...15 Mar
Mike, check out the internet for sign...22 Oct
Might be best to re-drill and tap to a...29 Aug
love the response, I too, will be a...24 Aug
Just for the record vacuum is not...18 May
I've saved many jobs, by adding a shim...4 Oct
I'll go one step further than John...10 Sep