About mephits

image: mephits's picture
Recent content
TitleUpdated
Titivilus Press2 Jul 18
Kelsey 5x8 for sale in Memphis11 Aug 16
Kluge available in Memphis area6 Jun 15
Looking for an Old Style Kelsey part.2 Feb 15
Press Resurrection7 Oct 13
C&P Rider Rollers31 Jul 13
OS Treadle on NS Machine?19 Dec 11
Recent comments
TitleDate ↓
The Kimble is almost certainly...2 Jun
Most likely the face was hand-drafted...29 May
Scott, look for things like "VFD with...29 May
You may also check to see if the motor...27 May
The hook is a bit worn, but that...21 Apr
Just a quick note to the folks posting...13 Apr
The simple fact is that truly standard...3 Apr
The only thing I know is...3 Apr
Another option is to check and make...15 Mar
You're welcome! One thing I notice in...15 Mar
LD, I'm not the original poster, but I...15 Mar
From basically the very beginning....25 Feb
Being into printing history, I'd want...5 Feb
Rib Tip, where are you located? You may...2 Feb
Thank you, John! As I understand it...2 Feb
I have a related question to this. We...30 Jan
You might look at...11 Jan
John, "gift" being used as a verb is...9 Jan
We have an American Printing Equipment...4 Nov
First off, congratulations on the...26 Oct
Neenah sell multiple duplex colors of...6 Sep
Tony, the small quoins are indeed Rouse...22 Aug
Jserkis, there are a couple of options...22 Jun
You might try contacting Braden Sutphin...7 Jun
That gray will have been the original...2 Jun
John, if they predate standardized...7 Mar
Also, these were often manufactured by...5 Mar
This would seem like a good candidate...25 Feb
I found the antique Potdevins online. I...29 Jan
If you can't find pre-gunned paper...28 Jan
I don't have any direct experience with...25 Jan
The usual questions here are "Where are...19 Dec
Dave, I've been thinking more about...7 Sep
Dave, I honestly hadn't gotten that far...29 Aug
An addition to the above: The pictures...28 Aug
I should preface my comments with...28 Aug
Short answer is that yes, different...10 Aug
I manage a modern printshop as my day...31 Jul
Another thing to think about would...30 Jul
Unfortunately, the offset oscillators...27 Jul