About PointFive

image: PointFive's picture
Recent content
Ink Disk needed - approx 9" dia27 Oct 14
Kelsey & Co. - research project.22 Jun 12
Treadled #3 Pearl actually printing! Educational31 Jan 12
Pearl #3 Sliding Trucks not rolling12 Sep 09
Over-tightening quoins7 Jan 09
AWT Foundry Type - AFT (not ATF)4 Jan 09
6x9 Kelsey-Victor Clone of C&P Pilot3 Dec 08
Golding Pearl (NS) - gear backlash6 Nov 07
Recent comments
TitleDate ↓
Thanks. Alan does not have this...5 Jul
Auction prices usually do not indicate...31 Jan
Consider joining the PearlRestor group...26 Jul
Without a doubt, the wood should first...26 Jul
On LetPress Mr. Richard Tautenhahn...7 Feb
The following dimensions for the 6 x 9...7 Feb
As a teenager, I was given one of...13 Dec
Don't sandblast with real silica sand....11 Dec
I have had several offers to sell all...11 Dec
Paul Bookbinder: Steve Saxe provided...31 Oct
Kelsey Presses. Your second press...12 Oct
I am assisting an elderly printer who...18 Aug
I have fonts of Kelsey New England...1 Apr
The concept is based on eccentrics....1 Apr
All vehicles are required to have a...20 Mar
Were you the lucky winner of the recent...13 Mar
On the point of this thread, I am...13 Feb
Here is more on AWT-AFT-ATF from...7 Jan
Response from Steve Saxe: I don't know...5 Jan
I would run it with the foot treadle...4 Jan
Caution, someone could get hurt. There...4 Jan
I've made my own poly plates with only...8 Dec
What you are describing is a Variable...24 Nov
I had the EXACT same problem with my...18 Nov
At one time it was not that unusual to...6 Nov