About phase4

image: phase4's picture
  • redrog
  • emil kahle zeus automat and heidelberg windmill 10x15
  • Uruguay
Recent content
TitleUpdated
heidelberg windmill stopped sucking after 2000...22 Mar 15
Embossing23 Feb 15
Embossing23 Feb 15
recommendation8 Dec 14
motor on emil kahle letterpress26 Nov 14
numbering software11 Aug 14
press identification14 Dec 10
emil kahle zeus automat13 Dec 10
Recent comments
Title ↓Date
you should havea new cutting stick you...10 Sep
You could try to varnish them 10 Apr
You could also use type high wood base...12 Jun
you could also try to use matte paper...4 Dec
you could also try to clean the pulley...16 Jul
you can use a carbon paper under the...8 May
you can mark a sheet when it is grabbed...21 Mar
you can mark a sheet when it is grabbed...21 Mar
you can do it24 May
You can also tape a steelrule to the...25 Jun
you can also search for a grafopress...26 Dec
Yes you will need different type of...12 Jun
yes she is a real beauty it took me 10...30 Nov
yes i used dunlop hoses 5/8 i think...23 Mar
wouldnt it be great if all printers...31 Oct
Would guess 1910 or 20 because of the...21 Jul
wild guess here but you did mention you...11 Sep
why dont use a positive image with...24 Dec
what i actually do is similar to your...24 Feb
very intersting hybrid but that is...6 Jul
very good contributions from all of you...25 Feb
use turtle wax and steelwool should...10 Sep
use low height perfrules preferably...28 Jan
Typenut i would say the government...30 Mar
try to clean the filter submerge it in...4 Oct
try to clean the filter submerge it in...4 Oct
this one could be a "Juwel"9 Sep
This commercial is...12 Mar
There was a Fórmula used for the...4 Oct
the valve for the powder spray is also...25 Mar
the tool i mentioneD looked like the...17 May
the rubberband works fine. it is a...5 Apr
the rollers for uv are different but it...11 Jun
the question is if you want to operate...30 Jul
the plastic strips from pallet...21 Oct
the motor runs at 1400 rpm23 Mar
the best quality bearings are SKF16 Jul
the air release is about 9 turns out...25 Mar
the acetate should work fine but you...12 Sep
the acetate should work fine but you...12 Sep