About Village Press Inc

Recent content

Title	Updated
Kluge impression	11 Apr 13
Village Press, Inc	29 Jun 11

Recent comments

Title	Date ↓
For steel rule dies we use Milwaukee...	7 Nov
I measure 8mm diameter and 13.625" long...	31 Aug
You can buy rollers for this press from...	4 Sep
I would run it 2 up, a front and back...	29 May
The oblique line "Jeffery" could...	24 Dec
This sucks big time! We have been a...	22 Oct
10 minutes tops if you are talking to...	22 May
http://www.gaec.biz/ Graphic Arts...	20 May
Note too that these stamping supplies...	7 May
That is phenolic board, it is indeed...	6 May
If you can't change the guides on the...	17 Apr
Think this is the part # T0237, it's...	10 Apr
Rick, perhaps you should swap your...	5 Feb
He was jesting, see first post. The...	1 Feb
Send me an email if you are just...	6 Dec
I'm loath to suggest this, as it may no...	25 Nov
We use sterling toggle base and, as you...	2 Nov
Sorry, their phone # is 770-229-5002	22 Oct
We have used Jorsen and Carlson in Elk...	22 Oct
SOS LInotype, LLC in Tennessee sells...	14 Oct
if you force them by hand you should...	7 Oct
Granted, the circumference of a...	20 Aug
Oops, just looked at pulley and there...	19 Aug
there should be a hex head set screw...	19 Aug
It is indeed a beautiful press, and the...	25 Apr
The GTS was the factory original cutter...	24 Apr
Here is image of counter weight, it has...	12 Apr
I only use auto feed for long runs of...	12 Apr
Right, sorry. The throw off counter...	12 Apr
Many thanks to Briar member Ted Lavin...	12 Apr
Two Rivers, Wisconsin, home of Hamilton...	9 Apr
Internet search of steel rule diemakers...	8 Apr
Vettelove, as the one who brought up...	6 Apr
I do think spell check works behind our...	6 Apr
I couldn't get past the misspelling of...	5 Apr
Very nice! Scanned Flickr image on...	12 Mar
Is it my eyes, or are you hitting the...	4 Mar
I would determine a cost per hour for...	14 Jan
What kind of press? What foil releases...	17 Oct
I have done several embossing jobs on...	22 Aug