About sarahridgley

Recent content

Title	Updated
Letterpress Weekly Roundup	4 Nov 14
Pheasant Press	4 Jan 14
Bed Height of a Vandercook No. 1 Proof Press	26 Mar 13
help identify this type case	8 Mar 13
What are these things under the bed of my...	1 Jun 12
Linotype, Presses, and Type being auctioned in...	30 May 12
identify this Vandercook please!	24 May 12
miehle No. 4	12 May 12
Howard Personalizer 45 Manual	20 Mar 12
Trucks and tracks on the windmill	1 May 11

Recent comments

Title ↑	Date
ah, a perfect solution! I will test it...	26 Mar
I added some blue tape to the rails and...	15 Apr
I added the rider roller, but I'm still...	17 May
I always have that happen with...	10 Jul
I am going to be in London this summer...	5 Jun
I did lots of google searches and...	14 Jun
i don't know about their paper, but i...	26 Mar
I have had lots of black spots on my...	31 Dec
I just use plain acrylic and it works...	11 Mar
I mix them all the time and it works...	10 Apr
I only posted it here because I am...	25 Jun
I sometimes use bits of double stick...	12 Sep
i use wax paper sometimes	25 Jun
I would recommend getting a press with...	27 Mar
if you have a diagram of the part, or...	30 Mar
It does have the gripper bar,but I only...	25 May
it was a giveaway. I am definitely...	24 May
I'd be interested in getting a set from...	4 Dec
I'm having a very similar problem. When...	3 Oct
i've registered at the Vanderblog, and...	1 Jun
Mick- thank you and I would like to be...	11 Nov
oh gosh, yes i did! glad I checked...	24 May
Oh you lucky duck. i went through every...	17 Apr
So, do you have any vendors you could...	27 Mar
Sorry, I already sold them. The...	4 Jan
Thank you!	9 Mar
Thank you! I contacted them and was...	7 Aug
Thank you, can you tell me where I...	16 Apr
Thanks everyone for your help. I am...	1 Jun
thanks for all the feedback! I really...	7 Nov
Thanks for all the quick replies...	13 Apr
Thanks so much!	20 Mar
That is a really fascinating project....	4 Apr
The auctioneer sent me a few more...	30 May
the roller does not lift off, only the...	1 May
The rollers are new, and I've been...	1 May
The type was slightly lower than the...	28 Mar
they also have one of those babcock...	30 May
well, it ended up being a little bigger...	14 May
well, the guy had two presses and about...	25 May