About LetterpressDad

image: LetterpressDad's picture
Recent content
Kelsey 5x8 rollers9 May 16
Kingsley Hot Foil Type25 Nov 15
Paper Drill19 Nov 15
Letterpress Cards at Bon Marche (Paris)4 Oct 15
What Characters Are These19 Jul 15
Carving Wood Plates with a Computer Controlled...4 Jun 15
A6 card stock27 Sep 14
Vandercook SP 15 on Ebay8 Jun 14
Age of Challenge Paper Cutter25 May 14
Letterpress Printing in Philadelphia18 May 14
Recent comments
TitleDate ↓
I really like Wild from Neenahpaper.com...26 Jun
Buy some of the blue backing from your...30 May
Google it - wikipedia has the story 24 Mar
Hate to show my ignorance, but is a...26 Feb
I am watching "Sweet Dreams," the Patsy...18 Dec
You might post your question on...28 Sep
Have you buyer show up, during banking...27 Sep
You should contact Paul Moxon at...16 Sep
Paul is not too expensive if you can...27 Aug
Louie You need to talk with an IP...15 Jul
You should contact Fritz at NAGraphics...28 Mar
You should contact Fritz at NAGraphics...28 Mar
Welcome aboard! But be warned...5 Mar
with a table saw, you can make your own...3 Mar
A $1(euro) is almost exactly type...2 Mar
I just donated - its easy Let's get...18 Feb
the screws are 1/4-20 by 1/2 you...8 Feb
C&P lost the procedural issue that was...23 Jan
You can find type high wood at...15 Jan
Where the presses are located will be...9 Jan
It might be smart to hire an...11 Sep
If Fritz is correct that you are trying...25 Jul
A part of making an impression is using...2 Jul
I moved one with the help of 3 college...24 Jun
You should consider getting advice from...9 Jun
I did live demos while selling...27 May
Thanks for the info - I measured/tested...11 May
Boxcar bases will cost you a lot, but...13 Apr
If you build your own or use something...13 Apr
Fritz Were they advertising a...3 Apr
Fritz is (970) 387-0212 - he's on...15 Mar
You can post a "for sale" on this...15 Mar
Sarah If you are in Canada, check...7 Mar
Sarah Buy the biggest* press you...7 Mar
You might contact Fritz at NAGraphics -...15 Feb
What is direct to polymer...19 Jan
Most of the folks you buy rollers from...17 Dec
I really don't understand what you mean...16 Dec
Thanks Fritz19 Nov
I don't think it's my job to "research"...10 Nov