About Bruce cpd

image: Bruce cpd's picture
Recent content
TitleUpdated
subject to tariffs5 Jul 18
kluge rider roller adjustment10 Aug 16
truck wear10 Jun 15
9/16 inch bearings16 Jul 14
compression springs3 Feb 14
Kluge rider roller26 Jul 13
gripper timing28 Jun 13
Recent comments
TitleDate ↑
I am in Landover, Md I'm trying to...8 Jul
OK so Ernest noticed that the two press...9 Jul
OK, no update yet for reversing the...15 Jul
We found a fellow who knows alot about...17 Jul
Hey thanks Mick for your comment. I...26 Jul
Thank you rontxhou so much for posting...31 Jul
I have 6 boxes that have been sitting...30 Aug
OK this is pretty far out there and...13 Sep
Are you using your Kluge to print with...14 Oct
Try Applied Industrial Technologies...8 Nov
Hi nikkitranchita, I can't say if any...2 Dec
Hi Orion J. looking at your sample...5 Dec
Hey 2boysandadog, Making mag or copper...19 Dec
Hi There, I'm an engraver. I...3 Jan
LetterpressDad, I use burins, also...6 Jan
I make 16 gauge magnesium plates...8 Jan
I have not used this product but I used...27 Jan
Hi SteveO54, As mentioned, if you can...5 Mar
That could certainly be the issue...14 Mar
There is a big difference in the asking...26 Mar
there is an Adana Eight-Five on...11 Apr
Hey iwillcreate, your best bet is...23 Apr
I realize that what I just wrote above...23 Apr
I have approximately enough packing...23 Apr
I currently buy 16g magnesium that mics...24 Apr
It may be that you need new rollers but...24 Apr
Hi jonsel You can purchase plywood...1 May
I get it from Universal Level...1 May
That's them but I always call them on...1 May
Hi lishii, I had similar problems with...19 May
There are some nice videos on youtube...20 May
Another problem you might encounter if...21 May
Hey platenpress, mine does not have...23 May
try again23 May
last try23 May
so here's the other side23 May
Hello gracefuldesigns, There are alot...4 Jun
Hi Davina, We do have a C&P 10x15...4 Jun
If you are interested in this press...12 Jun
If worse comes to worse and you cannot...16 Jun