About daleraby

image: daleraby's picture
  • Member for 5 years 30 weeks.
  • Last access 23 hours 46 minutes ago.
Recent content
TitleUpdated
Split Fount on Platen Press8 Feb 21
Quotation Marks4 Jan 21
Borders & Corners18 Dec 20
The Wisconsin Job Case8 Nov 20
Atlantic Numbering Machines26 Sep 20
Hazards11 Jun 20
Pagination for Books Composed from Typed Copy26 Apr 20
New Type Distribution21 Apr 20
Off The Rails1 Sep 19
Taller Character Within Font7 Oct 18
Recent comments
TitleDate ↓
OK, this is not really an answer, but I...6 Feb
I've always set my spaces the same as...20 Jan
Well, I do actually own several real...18 Jan
Here is the form I came up with to...17 Jan
Actually, I got a set of three with the...15 Jan
I have a couple of them around here...15 Jan
Well, I have found no reference to...5 Jan
Are presses like this ever for sale?...23 Dec
Geoffrey's technique seems sound for...21 Dec
Well, at least one person recognized...20 Dec
"Remember, the most time consuming part...20 Dec
Looks kinda bullet-proof (pun...19 Dec
This was printed from a polymer plate...19 Dec
My press came with a 5-gallon bucket...19 Dec
So how have things worked out for you...19 Dec
Not to throw a bucket of water on...19 Dec
You might get by using cut-off pieces...19 Dec
So how is your adventure progressing?19 Dec
The only way I think this would work...18 Dec
I've had this same problem with a...18 Dec
I've always used oil-based inks. I...18 Dec
Pulled out the old Sony Mavica and took...12 Dec
Well, I suppose it's about time I...11 Dec
Dunno where you are located, but if you...3 Dec
You do realize that polymer plates come...14 Nov
I guess I never was all that concerned....13 Nov
This blasphemy will happen at Rockland...11 Nov
Thanks for the feedback. Yeah, my...9 Nov
Well, for those who are interested, I...21 Aug
Does anyone else find it a little...19 Aug
Is there a foundry where I can order...16 Jun
I would be more concerned about why the...15 Jun
jhenry: Yes, it would be safer, but I...11 Jun
I started out with a $100.00 Craftsmen...20 May
I have some background in...18 May
Well, Rick, I've been called worse than...3 May
It seems that doing it with LibreOffice...3 May
Thanks for all the suggestions! Just...28 Apr
I suppose. I'm sure I'll make just a...26 Apr
Y'know, I have looked over my post that...26 Apr