About cleanwash

image: cleanwash's picture
  • Member for 16 years 4 weeks.
  • Last access 9 years 49 weeks ago.
Recent content
TitleUpdated
10x15 Windmill w/foil unit, Vandercook SP-15, etc.7 Oct 14
Air hose leak on a Windmill31 Oct 10
Cleanwash Letterpress3 Mar 10
Heavyweight stock for business cards25 Jan 10
Relief Mate Innoplatemaker 23 Jan 10
Windmill ink fountain tips29 Jun 09
Windmill impression troubleshooting30 Jan 09
Recent comments
TitleDate ↓
Are you doing a pre-exposure? 30...12 Nov
In my experience, welded cast iron does...10 Nov
you can buy ink starter kits which...25 Apr
hi Kathy. This is a rather common...22 Apr
does the art department have a...3 Dec
I wouldn't cut the plate away from the...1 Nov
I pulled the hose off for measuring...31 Oct
http://www.letterpresspaper.com/ is...20 Oct
neither boxcar or their sister...15 Oct
i use kf95 plates- i'm not sure if it...6 Oct
before you go experimenting with...6 Oct
i was able to do it just by following...8 Sep
if you don't have access to a pantone...2 Aug
What mesh are you using? Using a high...25 Jul
I actually apply to the distributor...16 May
got the same email! i told him that i...7 May
a phone call goes a long way!25 Apr
The people at Porridge paper do great...9 Apr
http://www.mcmaster.com/ should have...7 Mar
they are extremely helpful if you call!...20 Feb
I have done it as an example for...15 Feb
Are you actually embossing? If not, and...10 Feb
I am not sure about the Sterling...30 Jan
Thanks very much!25 Jan
Oops. Sorry I should have specified....22 Jan
Obviously, this is an extremely...22 Jan
For smaller runs you might want to try...6 Jan
I am having the same issue with my C&P....3 Feb
I'll try retightening the bolts... Full...30 Jan