About century printer

image: century printer's picture
  • Member for 15 years 10 weeks.
  • Last access 8 years 10 weeks ago.
Recent content
TitleUpdated
8 x 10 Chandler and Price platen press and...20 Feb 16
chandler and price presses 8 x 10 and 10 x 15...19 May 13
Recent comments
Title ↓Date
you could use crystal clear in a spray...12 Oct
You could always fill the pits with...21 Feb
You can make some pins out of...4 Mar
you can get very fine lines with the...17 Jun
You are really worried about spending...16 Mar
You are definately right Fritz, uneven...7 Mar
Yes, BarbHauser is right. Larger areas...4 Mar
Winking cat is right, the trucks and...16 Mar
very interesting. I can tell you...27 Mar
use gans nature wash it is...20 Feb
Uneven rails mean a useless press for...20 Feb
try any watercolour paper that matches...20 Feb
to figure out what size base is a good...10 Mar
There is a step by step proccess to...13 Mar
There are many ways to do everything it...28 Mar
sure paul, if the shoe fits. I...10 Jun
skip the typan, that will not give you...11 Jan
skip the soy inks, oil based prints so...6 Jun
rollers should be replaced every 2-3...27 Mar
paul-it has worked for me for two years...9 Jun
Looks like a nice 8x12 old style!...6 May
It wouldnt hurt to have a smaller base...10 Mar
It works great for putty knives...23 Feb
it will run the thick lettra 220 no...17 Jun
It may be possible that you are either...3 Mar
it could be worth the price simply...20 Feb
if it works, it should be worth about...20 Feb
if it isnt too late, dont buy a kluge....20 Feb
i would try the silk screening inks...20 Feb
I would suggest washing up and re...19 May
i would definately recommend the rubber...20 Feb
I will tell you that I firmly believe...27 Mar
I will have to try the veggie oil. I...3 Mar
I think what many are missing here, is...23 Feb
I once heard that someone was using a...30 Mar
I just use a piece of stainless steel...19 May
I have used everclear alcohol for...23 Feb
I have tried it all and gans nature...20 Feb
I do agree with the above comments. And...28 Mar
I completely agree, I would just cut...30 Mar