About modernman

image: modernman's picture
  • Member for 14 years 26 weeks.
  • Last access 11 years 1 week ago.
Recent content
TitleUpdated
Ludlow Cooler and Terminal Box7 Sep 11
Heidelberg Parts28 Mar 11
Windmill Feed/Delivery Clutch8 Dec 10
Calculating exposure levels of solvents5 Nov 10
Linotype Metal2 Nov 10
Another press weight question8 Oct 10
making a jogger3 Oct 10
spacing1 May 10
leaving ink on press15 Apr 10
Advice on C&P Problem - Distortion in Press Bed9 Jan 10
Recent comments
TitleDate ↑
I don't really see what is so bad....19 Jan
I did a small amount of research when...1 Feb
What is the size and weight of the...11 Mar
A 30" Challenge blade has 6 bolts, so...12 Mar
I have no experience with Windmills...13 Mar
On that note, I would mention that we...13 Mar
The press to me looks like a C&P with a...13 Mar
A vernier micrometer works very well.18 Mar
A screen printing unit releases a lot...22 Mar
To add my own experience, I burn...22 Mar
I believe Gerald Lange who runs the...28 Mar
I buy Van Son oil and rubber base inks...9 Apr
Great! Thanks for the advice everyone....16 Apr
What is a bikkie, if you don't mind me...16 Apr
Clean out the oil holes with the...18 Apr
In the other pictures provided I can...27 Apr
Inkjet film solutions exist primarily...28 Apr
Photoshop will work fine. The images...28 Apr
Perfect. Thanks very much.2 May
It really depends on model/features...4 May
http://briarpress.org/172384 May
Debossing is a process that raises or...13 Jun
Is square coaster stock available from...11 Jul
Blundstone boots are laceless and the...14 Jul
No windmill expert but it seems with...16 Jul
Press will need some work and new...16 Jul
There is a wealth of information...17 Jul
There is tonnes of information on...17 Jul
Most presses are undercut .040" to...21 Jul
I know it seems you aren't, but you are...24 Jul
Won't work, sorry. You'll have to have...24 Jul
Boxcar Press makes photopolymer plates...25 Jul
I have a 750mm (30") cutter with a very...1 Aug
The first stickied classified is for an...29 Aug
Make sure to leave a gutter between the...14 Sep
I second Gerald's feelings. I do agree...3 Oct
Again, why does it matter that the...4 Oct
Thanks for the information!4 Oct
I've gone pretty low tech for duplexing...7 Oct
It seems like this shop might not be...8 Oct