About Vrooooom

Recent content

Title	Updated
Challenge 193 Disassembly	24 Jun 16
Mystic Multiples	31 May 16
Kluge Feeder off the tracks	7 Aug 10
Adjusting the rails on a N series Kluge?	29 Jul 10

Recent comments

Title	Date ↑
Unfortunately there don't seem to be...	27 Oct
you may find it worthwhile to make a...	2 Apr
It's also a good idea to practice...	6 May
Paper acclimation is mainly a concern...	12 May
If you want to try baby oil, you should...	2 Jun
By my count you could trim the second...	10 Jun
Leenah, Sounds like you have...	7 Jul
$2000 dollars was the quote a rigger...	20 Aug
I was in the same situation and ended...	31 Aug
There are already a few threads on this...	13 Oct
If your gauges are .75, it sounds like...	28 Oct
They might be assuming that you're...	28 Oct
"The Printer's Song" still tugs at my...	3 Dec
Most bails I've worked with have been...	18 Dec
Looks like a nice little collection....	27 Jan
I believe that table is your step wedge...	5 Apr
Bah! Try screenprinting 4000 3 color...	5 Apr
I second dickg; most offset shops will...	17 Apr
There's a lot of good sites to keep on...	18 Apr
Katiebee, When you're just starting...	23 Apr
Could be a few things. Do you have some...	23 Apr
If you're meeting with a client in...	23 Apr
Looking pretty damn good, Fabio. Be...	26 Apr
I'll preface this by saying I'm no...	27 Apr
I believe the paint itself will be...	27 Apr
Don, You should definitely check out...	2 May
Depends on the plate; best to check...	4 May
I would agree with Daniel. The fact...	9 May
It really just adds some splotchy areas...	9 May
I would clean up that oyster (?) a bit...	10 May
I think it may have been, but plenty of...	10 May
Haha, I was just wondering the same...	25 May
If the client's paying you for the...	25 May
The flickr page has a picture of them...	25 May
Paper gauge pins can help too! Use card...	28 May
There are few threads and blogs which...	1 Jun
Check out this flickr set. Electrolysis...	1 Jun
There are, but ultimately it's probably...	1 Jun
Excellent, thank you so much!	1 Jun
For our studio's purposes, Master...	2 Jun