About dicharry

image: dicharry's picture
Recent content
TitleUpdated
Serious Gauge Pins10 Mar 11
Serious Gauge Pins10 Mar 11
Baltimore No. 11 Rollers Recast?2 Sep 09
Do You Use a Feedboard?18 Mar 09
Cutting Sticks18 Mar 09
Parts for NS and OS Pilots5 Sep 07
Paper Recommendations16 Jan 07
Recent comments
TitleDate ↓
SWAG = Silly or Scientific Wild Ass...18 Mar
I should have been specific. I think...8 Mar
You won't have trouble removing it....8 Mar
Filters have been cleaned and lines...31 Jan
The '204' you are finding is likely a...20 Jan
Many times the inking system was...18 Jan
I can understand the suggestion to get...7 Jan
This is a job that would require...7 Jan
Probably worth about $500 each...20 Dec
I believe the rider on my 1970 red ball...18 Dec
And yes… the longer lever is not a...13 Dec
I still don't understand the lack of...13 Dec
Oh… and please don't ship it. These...1 Dec
If you put it on eBay you'd probably...1 Dec
That highlighted part in the second...1 Dec
I meant oil inside the roller frame (on...30 Nov
I'd first suggest a good oiling....29 Nov
It's on backwards. Disconnect the throw...12 Nov
Speed is controlled mechanically...12 Nov
Congratulations, Rick! It's always...18 Oct
I'd recommend rubber. Ramco Roller...18 Oct
Bill is right… not all C&Ps had the...8 Oct
It could also be the amount of ink...25 Aug
Also… I'd keep the ink stored...22 Aug
As long as you warm the room (and the...22 Aug
Ryan, That mysterious switch...20 Aug
Dick and Nturpin: Glad this helped your...19 Aug
That may be too much ink. It looks like...19 Aug
Yep. The bolt comes out and oil is...18 Aug
Make sure it is completely oiled....17 Aug
I believe the Regular (Old Style) C&Ps...15 Aug
A little under 36 inches wide and 1000...15 Aug
C&P = $300-1,000 Vandercook = $5,000 -...12 Aug
...11 Aug
Lora, I can definitely see where...10 Aug
Dan Barron, the seller of this press...10 Aug
I could be wrong, but I don't believe...10 Aug
Bill, It looks like an Old Style...27 Jul
Rick, Do you have the roller arm...21 Jul
It's going to seem like overkill, but...6 Jul