About Nickel Plate Press

image: Nickel Plate Press's picture
Recent content
TitleUpdated
This is a Printing Office - 2 color broadside6 Oct 14
19th C Script Font ID27 Apr 14
Heidelberg Windmill Christmas Card13 Dec 13
Little Giant #6 - first job17 Nov 13
Recent comments
TitleDate ↓
alistair, Here is an example of...5 Jun
Your marks and smear are at the tail...5 Jun
Fram, It was a good idea to take...21 Jan
The loss of Greg is another tragedy of...17 Jan
Nope, as long as the rollers are set to...16 Jan
Sharecropper As I wrote . . ....15 Jan
The ink will not slur if the rollers...14 Jan
Your rollers are not going to slide...14 Jan
Did you try adjusting the roller tracks...13 Jan
Just adjust your roller tracks...13 Jan
The typeface shown is Balloon Light....8 Jan
Check the capital "I" section. I've had...29 Dec
Even if matrices were still around...2 Nov
Royal Script. Central Type Foundry...30 Oct
I just did an eBay search for...29 Oct
This book is a must-have if you want to...5 Sep
eBay prices are stupid high. Buy...2 Sep
Neat! But, he'd better watch how close...25 Aug
The press should not be "on impression"...24 Aug
The typeface shown appears to be...29 Jul
The original photo above shows type...18 Jul
I don't know the situation you have...30 Jun
Getting a reading of 1/8" ink stripe on...9 May
Mural is the original name for this...18 Apr
Do you intend to make photopolymer...11 Feb
Frank makes a couple of excellent...4 Feb
Suggest you use a guide pin, even a...3 Feb
typenut, If you read NA Graphic's...27 Jan
I've not found pressboard at Ganes...25 Jan
Cache, you have too many numbers...18 Jan
Trucks should be "keyed" to the roller...8 Jan
The first picture is not Franklin...4 Jan
Christmas greetings from the Nickel...24 Dec
Follow the directions for uploading an...20 Nov
You've a very nice shop and facility...11 Nov
Valley Litho Supply has Van Son Rubber...4 Oct
Forget Jack Popkin's parts. They tossed...17 Sep
Or . . . you could determine the...19 Aug
Are you also missing the "Q" and...3 Aug
Do you mean Kraft paper? Michael 30 Jul