About AdLibPress

Recent content

Title	Updated
It’s a New Year	1 Jan 22
Page Scans Comparato	19 Jun 19
The first century of printing in Europe	9 Apr 18
Seeking Deepdene type and tie-up slugs	29 Mar 18
The Giving Season	12 Dec 17
Orphan Wood Type Letters	26 Nov 17
16x20 chase	3 Aug 17
Softening rubber rollers	19 Sep 16
Alan Kitching article	2 Apr 16
A new J J Lankes book	13 Sep 15

Recent comments

Title	Date ↑
Elizabeth, Thanks for posting this...	22 Nov
Daniel, you're right -- and not just...	19 Jan
Have you checked to be sure you have...	20 Jan
RMG is partially right in that...	20 Jan
Maybe it's time for a concerted effort...	23 Jan
If it's a C&P it's more likely an 8x12...	23 Jan
I had one of these, as well as its...	24 Jan
This discussion finally built a hot...	24 Jan
I use Delorme's Street Atlas USA a lot...	25 Jan
Sometimes the flywheel end of the shaft...	26 Jan
I posted one of the responses to your...	27 Jan
Lynn, try oiling both ends of the...	27 Jan
I think this is either a Golding...	30 Jan
Have you verified that it is an Adams...	31 Jan
That looks like either a zinc or a...	1 Feb
Zinc is almost unavailable in the US;...	1 Feb
Did you get roller cores and/or trucks...	2 Feb
Unfortunately, with current...	3 Feb
If you get the rollers and trucks from...	3 Feb
I think you're right. I'm not familiar...	5 Feb
I'm guessing that a regular-thickness...	5 Feb
This looks like a 10x15 -- is it? Are...	6 Feb
If you'd tell us where the press is...	6 Feb
I am going to try to set up a meeting...	7 Feb
If you can locate a welder who can...	13 Feb
I've had pretty good success using Van...	13 Feb
I don't know anything about the Horton...	17 Feb
No clutch in and of itself is a speed...	18 Feb
Unfortunately there is a very large...	19 Feb
My recollection is that flexo uses...	19 Feb
GRIPHOG has a new web page at...	19 Feb
Lynn, thanks for posting those...	20 Feb
Unless you got a chase that isn't...	22 Feb
The American point and the Didot...	24 Feb
Dan Horowitz, please contact me...	27 Feb
Daniel, can you tell me how I would...	27 Feb
It's a Model (the actual name), made by...	28 Feb
I was thinking the same thing, but the...	28 Feb
Thanks, Daniel. Two or three additional...	1 Mar
I hope you haven't damaged your new...	2 Mar