About AdLibPress

image: AdLibPress's picture
Recent content
Letterpress printing pressure per square inch3 Oct 22
Letterpress printing pressure per square inch3 Oct 22
It’s a New Year1 Jan 22
Page Scans Comparato19 Jun 19
The first century of printing in Europe9 Apr 18
Seeking Deepdene type and tie-up slugs29 Mar 18
The Giving Season12 Dec 17
Orphan Wood Type Letters26 Nov 17
16x20 chase3 Aug 17
Softening rubber rollers19 Sep 16
Recent comments
Title ↓Date
"Litho" is a shorthand for offset...25 Aug
"cannot be understated"? If it weren't...6 Apr
Zwack, You might also research is...3 Sep
Zind, if you are in Germany there are...19 Aug
Zinc photoengravings were made using an...11 Feb
Zinc is almost unavailable in the US;...1 Feb
You're right, Paul -- I had not looked...17 Jul
You're right -- the Ebay prices are for...26 Apr
You're right -- $265 is an OK price. If...26 Jun
You'll want to hook it onto the crane...19 Jul
You'll want to be careful with your...2 Sep
You'll need to specify what kind of...3 Oct
You'll need better proofs to get a good...9 Nov
You'll have trouble carving end grain...20 Jan
You'll have trouble getting any kind of...7 Aug
You'll have to remove the "&" from the...29 Oct
You'll have to make your own like Ben...8 Jun
Your Sigwalt (are you sure it's a...13 Aug
Your grippers look pretty much like...30 Jul
Your drawings lack a critical dimension...3 Feb
Your best bet is probably to remove...11 Sep
Your best bet for lifting is to use the...28 Jul
You would have to modify the mats so...4 Jun
You would have to machine the raised...24 Sep
You will have the problem Inky pointed...8 Mar
You want to be careful about very...30 Nov
You should probably be backing your...24 Sep
You should be able to use the existing...1 Aug
You should be able to set the press to...16 Nov
You say you're using deep relief plates...22 Mar
You need one of those John Thompson...7 Sep
You might want to take a look at this...24 Mar
You might want to see if you can...17 May
You might want to post a photo. I'm...20 Oct
You might want to consider pressing the...15 Jan
You might want to be more specific...15 Sep
You might try to contact Churchman in...5 Mar
You might try looking in the phone...18 Jan
You might try contacting Don Black at...7 Sep
You might try bending the key a little...18 Mar