About Sumner Lokken

Member for 5 years 50 weeks.
Last access 26 weeks 2 days ago.

Recent content

Title	Updated
Bucknam Press	1 Apr 08
Embossing using photopolymer plate material for...	28 Jul 07
Kluge foil attachment	17 Jul 07

Recent comments

Title	Date ↓
What you really need to have a...	3 Nov
Typenut - I did not mean to be...	13 Oct
Typenut - your sample is very good, it...	13 Oct
You will get your best results with a...	12 Oct
I work with designers on a daily basis...	8 May
If you are working with designers, you...	5 May
I usually choose my Kluge for...	14 Jan
I don't know if they will make a noisy...	8 Jan
Boxcar probably outputs film at 2540DPI...	21 Mar
I do most of my die cutting on my Kluge...	27 Nov
I pack to .040 (Jacket+packing). Any...	25 Nov
I have a V-36, a Kluge and a Windmill....	11 Nov
This would be much easier if I had a...	31 Aug
You either have to be desperate or...	31 Aug
Matt On my V-36, under the feed...	28 Aug
Peter, I recently ran 20,000 sheets of...	28 Aug
Come on Mike - Kinko's has always been...	22 Aug
All Challenge cutters I have used have...	22 Aug
I am looking at this as if I were a...	20 Jun
Madmaudepress Unless you are going...	19 Jun
Imagesetters were not very common...	19 Jun
I would get a Kenro camera and a...	19 Jun
Corn starch or rice starch might work...	12 Jun
Die cutting does not have to be...	28 Feb
Jenny, I am in Bozeman. You can find...	16 Feb
Isn't a Speedmaster 102 a 40" offset...	20 Jan
plyzo, You could lock up your base...	25 Dec
I've been using Phenoid for years, but...	30 Sep
Aheser I would stick to the Boxcar...	14 Sep
I would say that inks designed for...	18 Jul
winking You are right in that I...	19 Jun
I have used photopolymer for ten years...	18 Jun
Mike You can turn the motor off and...	9 Jun
There should be two T-handles that...	8 Jun
You should start with a new surface on...	1 Jun
sylvia c Unless you are printing...	14 May
I got my V-36 through a 42" door. I...	10 Apr
I can't help but wonder if there might...	9 Mar
gusandruby Generally, I use oiled...	24 Jan
I use the standard PMS book for...	22 Sep