About Bern Bennett

image: Bern Bennett's picture
  • Member for 16 years 8 weeks.
  • Last access 12 years 34 weeks ago.
Recent content
TitleUpdated
Heidelberg platen for sale UK31 May 09
Why this passion for letterpress?3 Jun 08
Interesting websites9 Apr 08
Anyone remember the CE Kelly press?27 Mar 08
Recent comments
TitleDate ↓
If you are only printing on the...19 Aug
Are you using part T0258F as shown on...12 Aug
If I was running this job,witha run of...15 Jul
Where I worked spaceband cleaning was...30 Jun
Stretching my memory back some 17...17 May
If the nipple fits into the oil gun...23 Apr
There does not appear to be any special...21 Apr
Hope the attached is of some use. It...21 Apr
It sounds as though you need to get...11 Apr
From memory, and I am going back some...4 Apr
Here in the UK, I believe that typeface...27 Mar
Having operated both 12 x 18 platens...18 Mar
James is right. Many years ago,when...1 Mar
Download the manual from boxcarpress...20 Feb
Download the manual from boxcarpress;...20 Feb
Hi DickG, I think you and I must have...5 Feb
Are you using a cutting jacket on the...3 Feb
Check the shear collar at the rear of...2 Feb
Remember the windmill was designed for...29 Jan
The lack of adhesion when overprinting...25 Jan
You say you are having lessons,are...22 Jan
Always anchor the lower tympan bar...22 Jan
Is this any help?21 Jan
I cannot explain your uneven...15 Jan
What do you mean by "the gearbox...13 Jan
Many years ago when I operated an...13 Jan
First check your suction lines for...2 Jan
DickG has the right idea. The height...24 Dec
Sorry, I can't remember the brand, as I...17 Dec
If it's hard to turn, turn it clockwise...11 Dec
Yes, the bar does not move, it's sole...11 Dec
Modernman, After 50 years spent...10 Dec
From your photo, I would assume you are...10 Dec
Have you refitted the sleeve which fits...9 Dec
The red yellow and green oiling points...2 Dec
Thompson the makers went out of...27 Nov
Tomlinson of Leicester. Over 50 years...26 Nov
There is no adjustment left to right of...26 Nov
Hi jksyer, Yes you are correct there...15 Nov
See page 106/7 in the manual downloaded...27 Oct