About dicharry

image: dicharry's picture
Recent content
TitleUpdated
Serious Gauge Pins10 Mar 11
Serious Gauge Pins10 Mar 11
Baltimore No. 11 Rollers Recast?2 Sep 09
Do You Use a Feedboard?18 Mar 09
Cutting Sticks18 Mar 09
Parts for NS and OS Pilots5 Sep 07
Paper Recommendations16 Jan 07
Recent comments
TitleDate ↑
we have a kutrimmer 1071 that we really...22 Feb
We are running a small card and...6 Sep
Are you using the delrin plastic trucks...5 Oct
Annie, I am not sure that new trucks...26 Nov
You can score on a Pilot. All you need...27 Nov
Annie, You may want to give Fritz at...27 Nov
I have had similar problems and I think...13 Feb
My guess would be too much ink. One...14 Feb
I will assume that you are using...24 Feb
Note that the below comment is not my...27 Feb
C&P NS...1 Mar
We use quite a bit of Letta as...1 Mar
We print on Lettra and we have just...2 Mar
What kind of tape are you using? NA...5 Mar
Calvert, The additional characters...8 Mar
Calvert, I too am on a Mac with...9 Mar
That could be any number of things. One...10 Mar
Opaque white (and most metallics)...10 Mar
Wow, the difference is night and day…...12 Mar
Staza, Depending on how much wear...17 Mar
Are your copper plates mounted on wood...19 Mar
I have heard horror stories about even...20 Mar
I don't think you'll ever get good...21 Mar
No trick technique. The photo was...26 Mar
The x by y sizes you are referring to...31 Mar
There are not terribly many out there...9 Apr
Erika, How far do you have to move...16 Apr
Forget the UHaul 5x9. Those are rated...18 Apr
You shouldn't have too much trouble....21 Apr
I am not sure what you mean by 'cover...22 Apr
With the crankshaft and throwoff lever...23 Apr
With what are you printing? Hot metal...23 Apr
Good advice from forme… I had never...23 Apr
Edmond, I am going through this same...25 Apr
I found mine on eBay of all places....11 May
also check ebay as there is someone in...17 May
Would a bath of mineral spirits hurt...19 May
This is indeed a Pilot clone made in...11 Jun
A couple questions: 1. You mentioned...11 Jun
The other thing to consider is that...25 Jun